Roofing Anchorages

Galvanized steel roof anchor with stamped single large D-Ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017 & A10.3...

Features Features 10" x 10" anchoring base plate with 2-1/4" connecting D-ring 360 degree Swivel D-ring allows for greater movement and worker...

Roof Ridge Anchor. Galvanized Steel with single stamped D-ring. Minimum breaking strength is 5000 lbs.Meets or Exceeds ANSI Z359.18-2017, A10...

Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking streng...

Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. ...

24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Po...

24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection P...

18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Singl...

18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Sing...

Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or ...

12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or...

12” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off o...

Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member. Key Features DE...

Features Manageable length is ideal for short-reach applications common with scaffolds and towers Features 1" polyester web with alloy steel D-rin...

Features Features 9" x 3" anchoring plate and 2-1/4" connecting ring Includes 3" Grade 5 lag screws for roof ridge or field installation. For temp...

Features Features 9" x 3" anchoring plates, 2-1/4" connecting ring and 5/16" Grade 80 chain Bendable plate joiner conforms to flat or sloped surfa...

Features Features 10" x 3" anchoring plates with 2-1/4" connecting D-ring Hinged design conforms to flat or sloped surfaces up to 12/12 pitch. Inc...

Features Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eye Includes 16D nails for roof ridge installation. For temporary ...

Features Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eye Includes 16D nails for roof ridge installation. For temporary ...

Features Features 10" x 3" anchoring plates with 2-1/4" connecting D-ring Hinged design conforms to flat or sloped roofs up to 12/12 pitch. Includ...

Features Designed for under-roofing ridge or field installation Features 8" stainless steel nailing plate with 2" connecting D-ring. Includes 16D ...

Features Features 10-3/4" stainless steel post with 11/16" connecting eye Includes weather resistant post cap with zip-tie and 10" roof flange. 4D...

Features Designed for installation under roof ridge cap Features 12" stainless steel nailing plate with 2-1/4" connecting D-rings. Includes 16D st...

Features Designed for installation under roof ridge cap Features 12" stainless steel nailing plate with 2-1/4" connecting D-rings. Includes 16D st...